To ensure the accuracy of your order, please refer to the diagram below when ordering:
Click on image for more information
ISO CORNER CASTINGS BLR 20100 & BLR 20000
Standard ISO type to suit all requirements. Made in accordance with ISO 1161/BS 3951 and Lloyds Register Guidance Note A -- Also available in Stainless Steel.
Click on image for more information
ALUMINIUM CORNER FITTINGS BLR 4035 & BLR 4045
Made to Independent Classification Society Approved Standards. Certification can be provided by: Lloyds Register of Shipping or Bureau Veritas. Manufactured from high-strength extruded aluminium.
Click on image for more information
ALUMINIUM CORNER FITTINGS BLR 1069 & BLR 1070
Designed for safe working load of 3250 KG and are manufactured to dimensionally comply with ISO 1161-1984. For lightweight military shelter & industrial use. Weldable aluminium alloy casting.
Click on image for more information
USA INLAND CORNER CASTINGS BLR 1028 & BLR 1029
To suit 8' 6" wide Dry Freight, Reefer and Tank containers. Apertures at ISO series 1 container positions and series 1 container sizes. Suitable for 48' and 45' long containers.
Click on image for more information
USA INLAND UPPER INTERMEDIATE CASTING BLR 1032
To suit 8' 6" wide containers. Apertures at ISO series 1 container positions and series 1 container sizes. Suitable for 40' long and over containers.
Click on image for more information
USA INLAND LOWER INTERMEDIATE CASTING BLR 1540
To suit 8' 6" wide containers. Apertures at ISO series 1 container positions and series 1 container sizes. Suitable for 40' long and over containers.
Click on image for more information
ISO CORNER FITTINGS BLR 91400 & BLR 91300 (German)
These products are made from special steel designed for low temperature working at -40C as stardard. BLR 91400 top corner/BLR 91300 Bottom Corner.
Also available in Stainless steel.
Click on image for more information
ISO EXTENDED TOP APERTURE BLR 263 & BLR 430
Extra length top aperture.
Longer aperture allows for quick spreader location and helps to prevent damage.
Click on image for more information
LOWER CORNER CASTING FOR 2.55 M WIDE CONTAINERS BLR 4450
These products are made from special steel designed for low temperature working at -40C as standard. To suit 2.55 meter wide Dry Freight, Reefer and Tank Containers.
These products are designed, manufactured and tested to meet the requirements of ISO 1161. The corner fittings are manufactured from high strength extruded aluminium.
Click on image for more information
EUROPEAN OVERLAND CORNER FITTINGS BLR 541 & BLR 542
These products are made from special steel designed for low temperature working at -40C as standard. For 2.5 metre wide Dry Freight, Reefer and Tank containers.
Click on image for more information
EUROPEAN OVERLAND CORNER FITTING BLR 607
These products are made from special steel designed for low temperature working at -40C as standard. For 2.5 meter wide Dry Freight, Reefer and Tank containers.
Click on image for more information
EUROPEAN OVERLAND CORNER FITTINGS BLR 1012 & BLR 1013
These products are made from special steel designed for low temperature working at -40C as standard. For 2.5 metre wide Dry Freight, Reefer and Tank containers.
Click on image for more information
MINI BOX CORNER FITTING BLR 1073
To suit off-shore and mini containers. To suit angled or vertical lift slings. Flush walls allow cost effective manufacture by using square cut rails and posts. Designed for low temperature working at -40C as standard.
Click on image for more information
MINI BOX CORNER FITTING BLR 4620
To suit off-shore and mini containers. Designed for both square boxes and width to length raio of 1:1.25. Safe working load (per set of 4) is 20 tons.
Click on image for more information
HI-CUBE INLAND FITTING BLR 4238
Lower intermediate castings. These products are made from steel designed for low temperature working at -40C as standard. To suit 102 3/8" wide containers. Ultra low profile for increased uninterrupted load space.
Click on image for more information
HI-CUBE INLAND FITTING BLR 4239
Upper intermediate casting. These products are made from steel designed for low temperature working at -40C as standard. To suit 102 3/8" wide containers. Ultra low profile for increased uninterrupted load space.
Click on image for more information
HI-CUBE INLAND FITTING BLR 4240
These products are made from steel designed for low temperature working at -40C as standard. To suit 102 3/8" wide containers. Ultra low profile for increased uninterrupted load space.
Click on image for more information
HI-CUBE INLAND FITTING BLR 4299
These products are made from steel designed for low temperature working at -40C as standard. To suit 102 3/8" wide containers. Ultra low profile for increased uninterrupted load space.
Click on image for more information
TWISTLOCK APERTURE CASTING BLR 1035
Designed for fabrication into demountable body systems. Standard ISO aperture to suit all types of twistlock head. Full ISO corner casting footprint.
Click on image for more information
WELD SEAL DOOR HINGE BLR 500
Container door hinge complete with heat-reacting heat-sealant. Automatically seals well known container door corrosion trap behind the hinge. Sealant expands up to 100% during welding.
Click on image for more information
FLUSH FIT HIGH DOOR ACCESS BLR 522
For use on all ISO Series 1 containers. Classification Society Approved. International patents pending. Allows increased door height up to 32mm. Nine high stacking capability.
Click on image for more information.
OPEN TOP SWINGING HEADER- BLR 592/593
For use on all 20 foot and 40 foot open top containers top lashed, canopy type. Meets ISO requirements. Easy interchangeable components. Supplied with intergral weather seal.
